Loading

  • facebook
  • google
  • linkedin
  • twitter

sohores_leftimgsohores_lefttitle

Interested?

Need Help?

Documentation?

MTA 6328-24 Specifications
Next Generation VoIP CPE Devices For Broadband Service Providers
Features | Specifications | Datasheet

 


A. LAN LED
B. WAN LED
C. 1-24 Voice LEDs
D. RUN LED
E. READY LED
F. POWER LED
G. Restore button

mta6028-24_back_lables

 

A. Amphenol connector for voice
B. COM port
C. WAN port
D. LAN port
E. AC power input
F. Power on-off switch

 

Product Specifications

Category Specifications
Broadband Uplink Interface 10/100 BaseT Ethernet (RJ-45)
Telephone Interface 24 FXS Voice Ports (Amphenol connector)
User Data Interface 10/100 BaseT Ethernet (RJ-45); 9-pin serial diagnostic interface

Telephony Specifications

Category Specifications
Protocols SIP 2.0, MGCP 1.0
Speech Codec Capabilities G.711, G.726 (No compression & simple compression) G.723.1, G.729A (Low bit rate codecs) Supports 3-way conferencing with compression
Signal Processing and FXS line signals Echo cancellation Ground Start/Loop Start FAX (T.38 and G.711 fall-back) Line reversal Caller ID FSK signal regeneration 16 KHz Metering pulse (MGCP only) FXS voltage drop when CA or RF fails
Approval FCC Part15A
Tone Ring back tone Busy tone Recorder tone 5 distinct rings Dial tone Confirmation tone Ring splash Stutter tone Off hook warning tone Message waiting indicator (MWI) Caller ID generation & call waiting tone
DTMF Tone DTMF tone detection and generation/RFC2833
Announcements Play out any voice stream sent by Call Agent controlled announcement server
OAM&P – Access components implemented: TFTP, FTP, HTTP 1.0, SNMP, Telnet, DHCP & DNS – Works with any SNMP (v.1-3) -based EMS – Offers web-based access as well as HTTP or TFTP-based remote software downloads or upgrades
QoS 802.1 p/q; IP TOS tagging; Built-in Priority Switch; Data Bandwidth Control; Adaptive Jitter Buffer

Physical Specifications

Category Specifications
Power Consumption Talk
42W (loop current ≤ 32 mA)
Idle 15W
Loop Current For load of 600Ω, SNMP-settable to 23 mA (default) or 32 mA (max.)
Ring Voltage > 40 VRms @ 2000 ft. 5 REN max. per port, 36 REN total aggregate 24 AWG loop
Power Supply AC 110~240V/50~60Hz
Dimensions 1.75 in (H) x 17.3 in (W) x 10 in (D) / 44.45 mm (H) x 439.42 mm (W) x 254 mm (D)
Operating Temperature 32°F to 104°F (0°C to 40°C)
Storage Temperature -4ºF to 158ºF (-20ºC to 70ºC)
Operating Humidity Up to 95% RH
Storage Humidity 5 to 95% RH
Share Button