Interested?
Need Help?
Documentation?
| MTA 6328-16 Specifications 16-PORT VOIP GATEWAY FOR ENTERPRISE CUSTOMERS |
| Features| Specifications |Datasheet |
| A. | LAN LED |
| B. | WAN LED |
| C. | 1-16 Voice LEDs |
| D. | RUN LED |
| E. | READY LED |
| F. | POWER LED |
| G. | Restore button |
| A. | Amphenol connector for voice |
| B. | COM port |
| C. | WAN port |
| D. | LAN port |
| E. | AC power input |
| F. | Power on-off switch |
Product Interfaces
| Category | Specifications |
|---|---|
| Broadband Uplink Interface | 10/100 BaseT Ethernet (RJ-45) |
| Telephone Interface | 16 FXS Voice Ports (Amphenol connector) |
| User Data Interface | 10/100 BaseT Ethernet (RJ-45); 9-pin serial diagnostic interface |
Telephony Specifications
| Category | Specifications |
|---|---|
| Protocols | SIP 2.0, MGCP 1.0 |
| Speech Codec Capabilities | G.711, G.726 (No compression & simple compression) G.728, G.729E (High quality high complexity codecs) G.723.1, G.729A (Low bit rate codecs) Supports 3-way conferencing with compression |
| Signal Processing and FXS line signals | – G.168 Echo cancellation – FAX (T.38 and G.711 fall-back) – Caller ID FSK signal regeneration – Ground Start/Loop Start – Line reversal – 16 KHz Metering pulse (MGCP only) – FXS voltage drop when CA or RF fails |
| Approval | FCC Part15A |
| Tones | – Ring back tone – Recorder tone – Dial tone – Ring splash – Off hook warning tone – Caller ID generation & call waiting tone – Busy tone – 5 distinct rings – Confirmation tone – Stutter tone – Message waiting indicator (MWI) |
| DTMF Tone | DTMF tone detection and generation/RFC2833 |
| Announcements | Play out any voice stream sent by Call Agent controlled announcement server |
| OAM&P | Access components implemented: – TFTP, FTP, HTTP 1.0, SNMP, Telnet, DHCP & DNS -Works with any SNMP (v.1-3) -based EMS -Offers web-based access as well as HTTP or TFTP-based remote software downloads or upgrades |
| QoS | – 802.1 p/q; IP TOS tagging; Built-in Priority Switch; Data Bandwidth Control; – Adaptive Jitter Buffer |
Physical Specifications
| Category | Specifications | |
|---|---|---|
| Power Consumption | Talk is 31W (loop current ≤ 32 mA) Idle is 13W |
|
| Loop Current | For load of 600Ω, SNMP-settable to 23 mA (default) or 32 mA (max.) | |
| Ring Voltage | > 40 VRms @ 2000 ft. 5 REN max. per port, 24 REN total aggregate 24 AWG loop |
|
| Power Supply | AC 110~240V/50~60Hz | |
| Dimensions | 1.75 in (H) x 17.3 in (W) x 10 in (D) / 44.45 mm (H) x 439.42 mm (W) x 254 mm (D) | |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) | |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) | |
| Operating Humidity | 10 to 95% R | |
| Storage Humidity | 5 to 95% RH | |
