The Company Products Partners Press Room Sales Support
 


MTA 6328Re4S Specifications
Next Generation VoIP CPE Devices For Broadband Service Providers

Features | Specifications



A.
Power
B. RJ-45 port (uplink to broadband access device)
C. RJ-45 (4-port switch for PC connections)
D. RJ-11 port (connect to phone)

Product Specification
Category Specification
Telephone Interface 1 or 2 FXS voice ports
Network Interface One 10/100 Base-T RJ-45 uplink port, Four-port 10/100 Base-T downlink switch
Accessory
Ethernet Cable, AC/DC Power Adapter

Software Specification
Category Specification

Protocols

SIP 2.0

Speech Codec Capabilities G.711 and one of the following:
G.726
G.728; G.729E (High quality high complexity codecs)
G.723.1; G.729A (Low bit rate codecs)
Supports 3-way conferencing with compression
Quality of Service IEEE 802.1p/q; IP TOS Tagging; Built-in Priority Switch;
Data Bandwidth Control; Adaptive jitter buffer
Signal Processing Echo cancellation: G.168
T.38 Fax (or fall-back to G.711)
Caller ID FSK signal regeneration
Line reversal
Certification FCC part 15B; CE; UL
Tones Ring back tone
Busy tone
Reorder tone
Dial tone
Off hook warning tone
Message waiting tone (MWI)/Stutter tone
Call waiting tone
DTMF Tone
DTMF tone detection and generation/RFC2833
Announcements Play out any voice stream sent by Call Agent or SIP Proxy controlled announcement server
Device IP announcement
OAM&P Access components implemented:
CLI, TFTP, HTTP 1.0, SNMP, Telnet, DHCP or DNS, HTTPS (available soon)
Works with any SNMP (v.1, v.2c, v.3)-based EMS
Offers web-based access as well as TFTP-based remote software downloads/upgrades
Provisionable set feature codes
Features Built-in DHCP server
NAT capabilities for simultaneous Internet access for multiple PC’s
IP routing and port forwarding
MAC cloning
IP/Domain filtering
STUN NAT traversal

Physical Specification
Category Specification
Power Consumption Idle: 12V/0.19A (2.28W) / Talking: 12V/0.28A (3.36W)
Power Supply 1 port Output: DC 12V, 500mA / Input: AC 120V, 60Hz, 100mA
2 port Output: DC 12V, 1A / Input: AC 120V, 60Hz, 200mA
Dimensions 8.30 in (H) x 5.35 in (W) x 1.53 in (D) / 211 mm (H) x 136 mm (W) x 39 mm (D)
Operating Temperature   32ºF to 122ºF (0ºC to 50ºC)
Storage Temperature   -4ºF to 158ºF (-20ºC to 70ºC)
Operating Humidity   10 to 90% RH
Storage Humidity   5 to 95% RH