EMTA 6528-2 Specifications Next Generation Integrated IP Telephony Enabled Cable Modem for Cable Operators Features | Specifications A. UPS port B. Power C. Cable interface D. USB port E. LAN port F. Standby button G. Restore button H. RJ-11 ports Product Specification Category Specification Service Provider Interface DOCSIS Standard CATV coaxial cable, 75 Ohms “F” type connector Telephone Interface 1 or 2 FXS Voice Ports User Data Interface 10/100 BaseT Ethernet (RJ-45); 9-pin serial diagnostic interface Telephony Specification Category Specification Protocols PacketCable NCS 1.0; RFC 2833; MGCP 1.0; SIP 2.0; P-QoS, D-QoS (MGCP only) Security Media, provisioning and signaling Speech Codec Capabilities G.711, G.726 (No compression & simple compression) G.728, G.729E (High quality high complexity codecs) G.723.1, G.729A (Low bit rate codecs) Signal Processing Echo cancellation: G.168 G.728 (highest MIPS) based three-way calling Fax (fall-back to G.711) and caller ID FSK signal regeneration Line reversal Approval FCC Part15B Tones Ring back tone Busy tone Recorder tone 5 distinct rings Dial tone Confirmation tone Ring splash Stutter tone Off hook warning tone Message waiting indicator (MWI) Caller ID generation & call waiting tone DTMF Tone DTMF tone detection and generation Announcements Play out any voice stream sent by Call Agent controlled announcement server OAM&P Access components implemented: TFTP, FTP, HTTP 1.0, SNMP, Telnet, DHCP & DNS Works with any SNMP (v.1-3) -based EMS Offers web-based access as well as TFTP-based remote software downloads or upgrades Cable Modem Technical Specifications - DOCSIS 1.1 and 2.0 compliant - Integrated A-TDMA and S-CDMA technology - Capable of providing 30 Mpbs upstream data rate - 8/16/32/64/128/256 QAM auto detection Cable Transmit/Receive Specifications Item Downstream Upstream Frequency Range DOCSIS: 88~860MHz Euro-DOCSIS*: 112~858 Mhz DOCSIS: 5~65Mhz Euro-DOCSIS*: 5~42Mhz Modulation QPSK, 16/ 32/ 64/ 128/ 256QAM QPSK, 8/16/32/64/128 QAM Data Rate DOCSIS*: 64 QAM: 30 Mbps 256 QAM: 42.8 Mbps Euro-DOCSIS*: 64 QAM: 41 Mbps 256 QAM: 55 Mbps QPSK 0.32 ~ 10.24 Mbps 8 QAM 0.48 ~ 15.36 Mbps 16 QAM 0.64 ~ 20.48 Mbps 32 QAM 0.80 ~ 25.60 Mbps 64 QAM 0.96 ~ 30.72 Mbps 128 QAM/TCM 30.72 Mbps Bandwidth Euro-DOCSIS*: 8 MHz DOCSIS: 6 MHz TDMA: 200, 400, 800, 1600, 3200 and 6400 kHz S-CDMA: 1600, 3200 and 6400 kHz FEC RS (128,122) GF128 with Trellis coding Reed Solomon Signal Level Receive Power Level: DOCSIS: -15 ~ +15 dBmV Euro-DOCSIS*: 64 QAM: –17 dBmV ~ +13 dBmV 256 QAM: –13dBmV ~ +17 dBmV Transmit Power Level : TDMA: +8 ~ +54 dBmV (32QAM, 64QAM) +8 ~ +55 dBmV (8QAM, 16QAM) +8 ~ +58 dBmV (QPSK) S-CDMA: +8 ~ +53 dBmV (all modulation) * Check for availability Cable Modem Other Specifications Signal-to-NoiseRatio (SNR) BER < 10^-8 DOCSIS: 64 QAM: >23.5 dB 256 QAM: >30 dB Euro-DOCSIS*: 64QAM: >= 25.5dB 256QM: -13 dBmV ~ -6 dBmv >= 34.5 dB -6 dBmV~ +17 dBmV >= 31.5 dB Security DOCSIS Baseline Privacy Plus: 1024-bit RSA and 128-bit Tripple-DES for BPKM protocol 56 -bit DES for data encryption X.509 v3 certificates DOCSIS Compliant to DOCSIS 2.0 and Euro-DOCSIS 2.0* Protocol TCP/IP, UDP, ARP, ICMP, DHCP, SNMP, TFTP, TOD, BOOTP, SYSLOG Configuration Ease of configuration and privacy control provided by resident or downloaded code from a Cable Modem Termination System (CMTS) Bridging Support for unicast, broadcast, and multicast IP packetsVariable-length packet cable Media Access Control (MAC) transport layerMix of contention and reservation-based upstream transmission Quality of Service Quality of service of MAC layer SIDs 16 Management Operations (SNMPv1/v2c/v3) RFC1157, RFC1901, RFC3416, RFC3417, RFC2578, RFC2570, RFC3411, RFC3412, RFC3413, RFC3414, RFC3415, RFC2576 MIBs support RFC1493, RFC3418, RFC2011, RFC2013, RFC2233, RFC3411, RFC3412, RFC3413, SNMP-NOTIFICATION-MIB, RFC3414, RFC3415, RFC2576, RFC2665, RFC2669, RFC2786, RFC2851, RFC2933, RFC3083, DRAFT: DOCS-IF-MIB, DRAFT: USB-MIB, DRAFT: DOCS-BPI2-MIB, DRAFT: DOCS-QOS-MIB, Append L/Annex H: DOCS-IF-EXT-MIB, Append L/Annex H: DOCS-CABLE-DEVICE-TRAP-MIB * Check for availability Physical Specification Category Specification Power Consumption Talk DC 12V @ 1.45 Amps (17.4W), loop current = 32 mA Idle DC 12V @ 0.7 Amps (8.4W) Loop Current For load of 520Ω, SNMP-settable to 23 mA (default) or 32 mA (max.) Ring Voltage > 40 VRms @ 2000 ft. 5 REN max. per port 24 AWG loop On Battery 8 hrs Talk Time / 12 hrs Idle Time using 12V 8 Amp-Hr. Battery Power Supply Output: DC 12V 1.45 Amps; Input: AC 100~240V, 50~60Hz, 400 mA Dimensions 8.3 in (H) x 1.5 in (W) x 5.4 in (D) / 211 mm (H) x 39 mm (W) x 136 mm (D) Operating Temperature 32°F to 104°F (0°C to 40°C) Storage Temperature -4°F to 158°F (-20°C to 70°C) Operating Humidity Up to 95% RH Storage Humidity 5 to 95% RH