eUPS 1230 Specifications Uninterruptible Power Supply Features | Specifications Communication Signal Interface The telemetry Signal interface allows the eUPS 1230 to output information regarding the health of the UPS. Pins 4, 5, 6, and 7 on the UPS side provide the necessary telemetry signals as defined by PacketCable. Vo+ : +Voltage output     Vo- : -Voltage output     SIG RTN : Signal Return     ON BATT : Low when operating from utility line. Open when operating from battery.     REPLACE BATT : Low when battery is charged. Open when battery fails the Self Test which is conducted once a month.     BATT MISSING : Low when battery is present. Open when battery is missing. Signal updated once every 10 secs.     LOW BATT : Low when battery is near full charge capacity. Open when operating from a battery with < 20% capacity. eUPS 1230 Status Indicators Green indicates the UPS is on utility (AC) power. Red indicates the UPS is in fault Fault Yellow indicates the UPS is on battery power Silence Switch for Buzzer Enable/Disable Specifications INPUT Nominal input voltage 120Vac Acceptable Input Voltage Range 85-260Vac Acceptable Input frequency Range 45Hz~65Hz Inlet IEC inlet OUTPUT Output power (max) 30W Normal Output Power 26.4W (12V x 2.2A) Normal Voltage 12Vdc Output Voltage Range 10.5V~13.8V Output Transfer Time 0 millisecond Line Mode Efficiency > 80% Output Protection Replaceable 10A fuse (with fuse holder soldered on PCB) BATTERY Type/Rating 12V/9Ah*1pc Discharge Prevention 10.5V ± 0.5V Rated Charging Voltage 4 hours to 90% without load after complete discharge Charge Current 4 hours to 90% without load after complete discharge Charge Current 2.5A Maximum Hot Swappable Battery Yes INDICATOR AC mode Green LED Lighting Backup mode Yellow LED Lighting Battery low Yellow LED Flashing Battery replace Red LED Flashing Battery missing Red LED Lighting Fault Red LED Lighting Battery self-test* Green LED flashing AUDIBLE ALARM Backup mode Sounding every 5 seconds Battery low Sounding every 1 second Battery replace Sounding every 2 seconds Battery missing Continuous sounding Fault Continuous sounding PHYCICAL SPECIFICATION Weight of unit 7.72lbs (3.5kg) Depth x Width x Height of unit 9.45in x 7.09in x 3.15in (240mm x 180mm x 80mm) OPERATING ENVIRONMENT Operating temperature 32ºF to 104ºF (0ºC to 40ºC) Operating humidity 0% to 90% Operating Elevation 0 to 9842.52ft (0 to 3000m) CERTIFICATION FCC/UL Approved, IEC6100-4-5 Tested * Occurs on initial AC power on and every 30 days thereafter