ESBC 8528-4B - is the ideal demarcation solution for Cable Operators to deliver SIP Trunking Telephony and Broadband Internet Service to Enterprise Customers. It seamlessly enables SIP-based Voice over IP by resolving traversal and compatibility problems with IP-PBX and IP-Phones through existing network firewalls. It makes offering SIP Trunking services a breeze by normalizing SIP traffic between the IP-PBX of the enterprise network and the cable operator by providing SIPConnect adaptation and Low-level SIP Header Manipulation. Click here for an interoperability list.
	ESBC 9528-4B - is a highly integrated DOCSIS 3.0 CM-based ESG with 8x4 channel bonding and 24 UGS SIDs for cable operators to deliver SIP trunking, hosted voice, and broadband internet services to business customers with IP-PBX and IP-Phones. With Smart-DQoS™ technology, ESBC 9528-4B can initiate up to 24 UGS service flows for end-to-end QoS voice communications without PCMM. The unit is equipped with a DOCSIS 3.0 eCM, an eSBC with B2BUA and SIP ALG, 4 FXS ports, and an internal battery.
	ESBC 9580-4B - Designed for MSOs offering SIP trunking, hosted voice, and high-speed data services, InnoMedia's ESBC 9580-4B is a highly integrated and highly manageable Enterprise Session Border Controller (ESBC) that can be auto-provisioned and remotely managed. With InnoMedia’s exclusive Smart-DQoS™ technology enabling device-initiated DQoS UGS service flow establishment, ESBC 9580-4B is ideally suitable for MSOs offering bundled services with end-to-end quality of service over HFC cable plants.
	EMTA 9528-4B - A first in the industry, EMTA 9528-4B is a DOCSIS 3.0, PacketCable 1.5 compliant 4 voice port eMTA with an internal battery and business friendly features targeted for business customers. With the 8x4 channel bonding, EMTA 9528-4B delivers downstream and upstream throughputs of 300 Mbps and 120 Mbps respectively. The 32 SIDs allows up to 24 Unsolicited Grant Service (UGS) and 8 Best Effort (BE) service flows.
	EMTA 6528-12 - equipped with NCS and SIP for PacketCable 1.0, PacketCable Multimedia*, and PacketCable 2.0, it offers broadband service providers a high density solution for their cable telephony services. Armed with an Amphenol connector, it provides easy connectivity for up to 12 ports on a single device offering the same business friendly features as the 4port EMTA models.
	eUPS 1230 - is a 12V 30 Watts 9 Amp-Hour battery which allows service operators to ensure uninterrupted VoIP service in the event of a power failure. This offers unsurpassed reliability of service, and gives the end user the comfort of knowing that they can continue to make a call when a power outage occurs. The eUPS 1230 works seamlessly with all of InnoMedia’s eMTA devices as well as any other device equipped with a compatible external battery input connector.

* See these products within a VoIP network.

Cable Industry
Supported by business friendly features such as loop-start and ground-start, high and low speed modem support for credit card transactions, open-loop disconnect, Fax (G.711 fall-back and T.38), and foreign voltage detection, the embedded MTAs have an integrated DOCSIS-compliant cable modem and are designed to be PacketCable and PacketCable Multimedia compliant.

Click to download InnoMedia’s Enterprise VoIP Solutions for the Cable Industry